Universal Mag Winder

this is a universal mag winder with interchangeable heads depending on which paintball mags you use. Currently i have designed for tmc and cf 20 mags. If i can get my hands on other mags i will make for those too.

there are three parts here, the winder head, the lever and the handle.

1.Winding head needs to be screwed with a M3x12

2. To assemble the lever-handle parts, you need a M5x60 coach bolt, on the end of which you will need 2 nuts tightened to hold the handle in place

3. Optionally, you can use some thread lock glue to secure the nut in place.

i used NEEMA3D pla: enolved
temps 215/60
infill 10% or whatrever you wish
CHEPs (0.20& 0.28) profiles will do a good job

i will also upload some cad designs in anyone needs to make adjustments