Slicer Discord
Universal Phone Caddy – 3D-Druckmodell von Thingiverse Thingiverse

Universal Phone Caddy

von wubwub89
19 Downloads
16 Likes
0 Makes
Zum Modell
Update 4/21/16 : V3 is much more robust. I have not personally had an issue printing V2, but I foresee some people will, mostly involving the fragility of the retainer clips.

My friends always leave their phones with cables hanging from the wall, adding to the clutter and risking damage. This simple device is designed to be supported by the outlet prongs (US/120VAC) in an attempt to be universal for all phones. You will also note the ability to hang from outlets that are transposed 90 deg. The large loop is for cable retention.

The best part of this design, is the profile. The lateral footprint will be less than most power supplies, so there really is a measurable space usage reduction.

The support center-line was designed to hold a large phone (In this case, my Galaxy Mega 6.3, Galaxy SIII pictured), while still allowing use of smaller phones, with a thickness to be determined.

This should be perfectly safe with phone screens, cases, and there should be no problems with e
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen