Thingiverse
Universal Powerstrip Brackets (Customizable)
door floydigus
16
Downloads
7
Likes
0
Makes
Builds brackets to screw your powerstrip to the wall.
Enter the dimensions of your powerstrip and the locations of the cable and reset button.
Measurements assume the strip will be mounted horizontally and are for the right-hand bracket - the left bracket is just an upside down right bracket, so you'll need to supply distances from the TOP for the left bracket if it needs any ports
If no ports are specified, a rectangular section will be cut out from the end of the bracket.
No clearances are included so you'll need to include them yourself.
I printed these at 0.28mm layer height, with 50% infill, and tree supports. See pic for orientation.
If you think of anything that's missing from this project, or you find any problems, please let me know!
Enter the dimensions of your powerstrip and the locations of the cable and reset button.
Measurements assume the strip will be mounted horizontally and are for the right-hand bracket - the left bracket is just an upside down right bracket, so you'll need to supply distances from the TOP for the left bracket if it needs any ports
If no ports are specified, a rectangular section will be cut out from the end of the bracket.
No clearances are included so you'll need to include them yourself.
I printed these at 0.28mm layer height, with 50% infill, and tree supports. See pic for orientation.
If you think of anything that's missing from this project, or you find any problems, please let me know!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
