Thingiverse
Universal Spoolholder
par MoDelft
2
Téléchargements
2
Likes
0
Makes
Simple but effective spoolholder. I was tired of having to adjust spoolholders for differently sized spool. This one was tested with 2.2kg rolls, 1kg rolls and 500 gram rolls.
Use 4x M5 x 8-12mm to secure the spool rollers. For the rollers you will need 4x 625ZZ bearings (16mm outer dia, 5mm inner dia). Bearings are press fitted in print; apply -0.3 offset on first layer to avoid elephants' footing. If the bearings are too loose, fold double a piece of duct tape and press it in :)
And if you ever want to start a 'safe' print farm, one of these metal extra deep closets (60cm) is perfect for it! Ambient temp reaches 40-45 degrees with 4 printers on, so its a heated chamber as well.
Use 4x M5 x 8-12mm to secure the spool rollers. For the rollers you will need 4x 625ZZ bearings (16mm outer dia, 5mm inner dia). Bearings are press fitted in print; apply -0.3 offset on first layer to avoid elephants' footing. If the bearings are too loose, fold double a piece of duct tape and press it in :)
And if you ever want to start a 'safe' print farm, one of these metal extra deep closets (60cm) is perfect for it! Ambient temp reaches 40-45 degrees with 4 printers on, so its a heated chamber as well.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
