Thingiverse
Universal Staggered PSU Mounts
von derikwhittaker
9
Downloads
3
Likes
0
Makes
Simple to print Staggered PSU Mounts for stacking 2 PSU's together. The staggered design allows easy access to the terminals. The design also provides about 40mm of space between the PSU's which will allow for quality airflow.
This design is universal, it will work with Meanwell LRS 350, Meanwell LRS 600 and Generic PSU's
Mounts using M4 bolts.
Print Settings
Notes:
Print laying flat
I used .32 layer height w/ 4 layers
I used 4 walls.
This design is universal, it will work with Meanwell LRS 350, Meanwell LRS 600 and Generic PSU's
Mounts using M4 bolts.
Print Settings
Notes:
Print laying flat
I used .32 layer height w/ 4 layers
I used 4 walls.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
