MakerWorld

Measure Tools

Universal Stand - Digital Thermometer / Hygrometer

von legenda128 · Measure Tools

2 Downloads

2 Likes

0 Makes

Universal Frame / Stand for Digital Thermometer / Hygrometer📦 Included FilesSTL model3MF file for Bambu Studio (optional)🔧 Recommended Print SettingsMaterial: PLA or PETGLayer height: 0.20 mmPerimeters: 2–3Infill: 10–20%Supports: Not requiredAdhesion: Skirt (3 lines)For best results, print the stand on its back, so the large rear surface touches the build plate—this gives excellent stability and clean edges.📏 DimensionsFront cutout: depends on your device (e.g., 52 × 30 mm)Overall height: based on the modelScreen angle: optimized for desk visibility(If you want, I can extract exact dimensions from your STL.)🎨 Multicolor Printing (AMS)Multicolor is not required, but you may decorate the front surface with two colors (e.g., border + accent).

stand holder support frame desk stand tabletop stand thermometer hygrometer temperature sensor humidity sensor digital thermometer digital hygrometer home accessoaries office organizer minimalist simple design no support 3d print

Kategorie

Measure Tools

Quelle

MakerWorld

Veröffentlicht

08.12.2025

Aktualisiert

12.04.2026

Was du zum Drucken brauchst: Anfänger Mittlere Konfidenz

Warum?

keine Supports · 2 Farben

Ohne Supports Einteilig 2 Farben / AMS

Supports 0/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA, PETG

Farben

2 (AMS/MMU empfohlen)

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Universal Stand - Digital Thermometer / Hygrometer

Ähnliche Modelle

Zur Sammlung hinzufügen