Universal UGREEN USB Sharing Switch - ESPHome

This is a remix of the Wifi Control Mod for UGREEN Switching USB Hub by @kn100.While the original project was designed for the USB 3.0 version, I have successfully tested it with the USB 2.0 variant, so it seems that the PCB dimensions for the USB 2.0 and USB 3.0 variants are identical in their dimensions and mouting holesI also used another microcontroller and components I had lying around. It shouldn't be hard to adapt this to every other microcontroller you have.Changes compared to the original designDecreased the distance between the USB ports and case - especially the microUSB Port wasn't accessible for my cables as it was sitting too deep in the case.Added filets (rounded corners)Changed the slot size for the cables, made it “open” so a 4-pin connector shouldn't be that necessary anymore. Gets closed using the esp housing part.Changed the screws to countersunk M2.5 screws (4x M2.5x5 and 4x M2.5x20) and inserts (had M2.5 with OD of 3.5mm and length of 2mm here)Made the