Unmatched Roland Deschain

Everything you need to play Unmatched with Roland Deschain, the character from Stephen King's "The Dark Tower" books. Attached are 3MF and STL files for: • Roland Deschain figure • Base compatible with Unmatched humanoid figures • Health dial • Ammunition chamber • 6 bullets • Link to the cards in English and PDF of the cards in Spanish • Box with lid for all the above READ ME Printing: Generally, everything prints without supports, 5% infill, and 0.2 layer height. Some parts require multi-color printing. If you can only print in 4 colors, keep in mind that the lid and health dial are printed in 5 colors. Feel free to modify it to your liking. I printed some parts on a decorative foil. If you only have the textured foil, you should consider the orientation of some parts where the decorative design is touching the foil, such as the lid and the health dial . The box and lid have a pause for adding magnets. Pay attention to their orientation. It's best if you print Roland in resin. If you can't, use a layer height of 0.12 and tree supports. When removing the supports, be very careful or you'll break the guns. You'll also need 12 neodymium magnets measuring 10x4x2 mm (6 for the box and 6 for the lid) and cyanoacrylate glue. Although the magnets are embedded, the glue is to prevent the extruder from attracting them after pausing to insert them. Deck: https://unmatched.cards/decks/RnqE/versions/zAJhKgv