Uno single switch keyboard case

this is a case for the very fun Uno single switch keyboard by u/snipeye. he claims it's "ridiculous and useless", but i beg to differ.
print both parts with 100% infill since they're so thin. the case takes a heat set insert for a 2mm screw. the order you assemble is important. you can put the switch into the plate before soldering, but it makes soldering a little tricky. you won't be able to solder the two pins directly behind the screw, but this is fine. they are not connected to anything. you can also solder the kit completely and then assemble the case. you'll need to make a cut in the plate and bend it a bit to get it on. i made the cut right at the corner on the thinnest side. once it's inside the case, you can't notice it.
make sure the plate is printing with the face down so that no supports are necessary.