Thingiverse

(Updated!) LPS/Doll Candy Bar

by dogteethvf

0 Downloads

3 Likes

0 Makes

The base is 5 mm tall and 14x20 mm wide. The ridges go out about 2.1 mm. I printed this with **60 mm/s for both printing and traveling**. It takes **6 minutes** to print.

*The LPS husky shown in the pictures was scanned by terrapin_studios and printed by me. Find the model I used here: https://www.thingiverse.com/thing:6382746.*

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

20 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for (Updated!) LPS/Doll Candy Bar?

Any FDM printer should handle (Updated!) LPS/Doll Candy Bar just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 20 mm is recommended.

Does (Updated!) LPS/Doll Candy Bar need supports when printing?

Yes, (Updated!) LPS/Doll Candy Bar will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is (Updated!) LPS/Doll Candy Bar available in?

(Updated!) LPS/Doll Candy Bar is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is (Updated!) LPS/Doll Candy Bar free to download?

Yes, (Updated!) LPS/Doll Candy Bar is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

(Updated!) LPS/Doll Candy Bar

Add to Collection