USAF Tech Control Magnet

This is a magnet representing the USAF Tech Control Water Walkers challenge coin / logo. I had to redesign the logo a bit due to poor quality images elsewhere on the net. Printed size is 75x75x3.25mmBottom has 2 removable supports to reveal holes for 15x15x1mm magnets. This is optional. Originally conceived to use the image to keychain feature but that isnt workable with more than 4 colors on a single AMS, so I redid this in Hueforge. ================================================= Project: Waterwalkers Coin Magnet.hfpPrint at 100% infill with a layer height of 0.1mm with a base layer of 0.1mmThe Model is 200x190.29mm in sizeYou may print at higher layer heights below the Min Depth of 2mmThe Max Depth is 3.3mm and the Actual Depth is 3.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ IIID Max Blue Transmission Distance: 2.8 PLA+ Ankermake Red Transmission Distance: 5.6 PLA+ IIID Max Light Blue Transmission Distance: 2.6 PLA PolyLite Pro Cold White Transmission Di