USB Camera Mount for Prusa MK3

Use this to mount your USB camera to your printer frame. I am using it for a Logitec 920.
The mount has 2 pieces and relies on the m3 blind nut backing piece to tighten down on the frame.
I used an M3 16mm bolt.
You will only need supports on the T backing piece. I chose to print this piece with the backing nut portion facing up. No other items needed support.

When assembling, set the blind nut using the bolt - Don't over tighten - then remove the bolt and push the backing T piece into the base slightly. Start your bolt and snug it enough to allow the bracket to be twisted into the channel.
Then tighten the bolt.
Mount your bracket using M3 Bolts 29mm and nuts. Mount the camera using a 1/4 20 bolt.