Thingiverse
Usb Cover
di Halker2007
0
Download
0
Likes
0
Makes
A perfect-fit USB cover to prevent dust from getting inside the port.
This is recommended to print with ABS, although anything else should work because there isn't much flexing.
-15% infill
-No supports
-Print straight up
-0.1 mm layer height
If you are using ABS, make sure your printer is covered (it has an enclosed printing area) to prevent temperature difference (to prevent cracking) .
This is recommended to print with ABS, although anything else should work because there isn't much flexing.
-15% infill
-No supports
-Print straight up
-0.1 mm layer height
If you are using ABS, make sure your printer is covered (it has an enclosed printing area) to prevent temperature difference (to prevent cracking) .
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!