Thingiverse
USB extension holder - NCPL
por ncplibrarysteam
1
Descargas
4
Likes
0
Makes
his is a holder for an Amazon Basic USB 2.0 Extension (https://www.amazon.com/AmazonBasics-Extension-Cable-Male-Female/dp/B00NH11R3I). Got tired of having to pull back our iMac to plug in a usb drive, or people forgetting to take it with them, so hopefully this will mitigate that. You'll need to remove the "Amazon Basic" label with a sharp knife or small flat head.
To install, you'll need to press the female end up and out from the bottom through the front at a steep angle, about 1/4" till the back part of the female end clears a lip inside the holder. Once the female end is flush with the top part of the inner space, then press it in till it's seated into the holder and flush with the front.
To install, you'll need to press the female end up and out from the bottom through the front at a steep angle, about 1/4" till the back part of the female end clears a lip inside the holder. Once the female end is flush with the top part of the inner space, then press it in till it's seated into the holder and flush with the front.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
