Thingiverse
USB socket for extension cable
por villamany
142
Descargas
100
Likes
0
Makes
Simple USB socket case. I designed this for the 3dpBurner2 3D printed laser cutter/engraver ( http://www.3dpburner.blogspot.com ), but it can be used for any other project.
If for any reason you want to use an extension cable this case is for you.
I found the extension cable as:
"50cm USB 2.0 B Male to USB B Female Socket Printer Panel Mount Extension Cable"
Print on STL position without supports. Use two M3x10mm bolts for fixing the socket to the case.
It´s ready to be fixed by using M3 stuff, double side tape or hot glue (i use double side foamy tape).
If for any reason you want to use an extension cable this case is for you.
I found the extension cable as:
"50cm USB 2.0 B Male to USB B Female Socket Printer Panel Mount Extension Cable"
Print on STL position without supports. Use two M3x10mm bolts for fixing the socket to the case.
It´s ready to be fixed by using M3 stuff, double side tape or hot glue (i use double side foamy tape).
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
