UsbJoy controller mount 30mm arcade button

This is a mount for UsbJoy 2.0 (usb joystick HID controller board) to 30mm illuminated arcade buttons. After putting the button through your panel, slide the mount onto the button, and then add the nut for the button. Use 4x M3 12mm socket head bolts, and locknuts to attach UsbJoy to this mount. UsbJoy 2.0 can be found here: https://github.com/nealpalmer/UsbJoyKicad schematic+layout, firmware, software, Bill of Materials, SmartButton (i.e. control the led) 30mm button from amazon: https://www.amazon.com/dp/B01N11BDX9 This is designed for robotics team FRC #2984 to use as part of a custom control panel. The driver solution has 12 SmartButtons, 1 joystick, 2 linear potentiometers, 1 rotary encoder, neopixel string, and 4 constant ‘buttons’ for UsbJoy unique identification. The operator panel has 2x UsbJoy, because we wanted more than 12 SmartButtons. The vertical version will print without supports.The horizontal version probably should have supports enabled.PETG-HF is a good material ch