Utility BOX with customizable text

Utility box with dividers that can be fixed to the top lid.External dimensions height 36 mm, width 96 mm, length 164 mmThe build plate surface of the top lid and divider can be filled with text. You can put any text you like. You can also add a border if you like and paint it with the slicer's paint tool.No support should be added to the partition. Since it is printed with a bridge, it may stick if the filament is not of good quality. After printing, please move the partition by hand for a while to let it acclimate so that the locking part can move smoothly.Insert 1.75mm filament into the hinge part, and heat the end part with a soldering iron or the like to crush it so that it will not come loose. The holes in each hinge are designed to be 2mm, but if the filament does not fit through, use a pin vise or similar tool to widen the holes.There is no structural problem even if the size can be changed in the length direction.FUSION data is also available for modification, so please feel fr