Utility Mini Box (MASTER)

3D Print Overview: Utility Mini Box This is a Utility Mini Box being prepared for a 3D print. It is an open-top container with a solid floor and patterned walls. The Design The box uses a hexagonal (honeycomb) mesh for the four side walls. This design is smart because it uses less plastic and makes the box look modern. It is designed to be printed without supports, meaning the printer can create the holes in the walls by "bridging" (printing plastic in mid-air across a short gap) without any messy extra material to clean off. Print Details Dimensions: The box is $77$ mm wide, $115$ mm long, and $46$ mm tall. Material: You are using PLA Basic, which is a strong and easy-to-use plastic. Print Time: The estimated time to finish this part is 1 hour and 27 minutes. Settings & Stats Layer Height: $0.20$ mm for a balance of speed and smoothness. Strength: You have selected 5 top layers and 3 bottom layers to make the base very solid. Infill: You are using Gyroid infill at 15% density. Gyroid