UV Cure Chamber

This is a small resin cure chamber i made out of a couple items i bought off Amazon and some printed parts. If you use the same parts i used the chamber measures 6"x6" and at least for my resin printer it is more than enough for my needs.

You will need to print 2 sets of the box corners and then one set of the uv mount.

1. Take the acrylic mirror and measured it out then scored it with an exacto knife and snapped it into 4 pieces (12"x12" mirror makes 4 pieces 6"x6")
2. Print 2 sets of the box corners and then one set of the uv mount.
3. Super glues the corners onto the acrylic mirror to form the box.
4. Line up the uv mount and glue in place being carefull to place them in the right place. (there are 2 different pieces the 2 the same should be opposite each other to give a frame for the light to sit inside). UV light should be able to sit inside the frame at the top

I just set this box on top of a glass mirror so i dont have to worry about the surface the parts sit on as t