UW Husky

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used:PLA+ ESun Black Transmission Distance: 0.3PLA Polylite Starlight Nebula Transmission Distance: 2.9PLA PolyTerra Savannah Yellow Transmission Distance: 3.5PLA Matte White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #6 (0.56mm) swap to Starlight NebulaAt layer #11 (0.96mm) swap to Savannah YellowAt layer #16 (1.36mm) swap to White for the rest. If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation or join my patreon for early access and request priority prints.https://www.patreon.com/sblayeredcreations