Uzumaki Vibes

The Model is 200x200mm in sizeThis print uses 4 unique filamentsArtist Taeko check her out here: https://www.tiktok.com/@grimcarvePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA Bambu Lab Basic Dark Gray Transmission Distance: 2.5PLA Bambu Lab Matte Ash Grey Transmission Distance: 1.5PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to Dark GrayAt layer #17 (1.44mm) swap to Ash GreyAt layer #22 (1.84mm) swap to Jade White for the rest.