V for vendetta - hueforge

Hueforge of V for vendetta posterThe photos shows the result in 200*135mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 134.93x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.68mmThe Max allowed Thickness is 2.44mm and the Actual Thickness is 1.88mm Filaments Used: #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 3 unique filaments Swap Instructions: Start with BambuLab Basic Jade White At layer #16 (0.8m