Thingiverse
V0.2 AWD Experimental
von smolboi
4
Downloads
4
Likes
0
Makes
UNTESTED AWD mod for the V0.2
You'll need 4xidentical nema14, 8x m3-30mm, 2x20t 5mm id pulleys and one of each printed part to replace the front idlers, front panel mounting and a custom split front door (cad model included).
You will also need an mcu that can support at least 6 stepper drivers or dual mcu's. If adding a second mcu, make sure to put all 4 xy steppers on the same mcu.
Print with standard voron settings or increase perimeters. See image for print orientation of all parts.
https://github.com/VoronDesign/Voron-0
Don't worry about funny guy
You'll need 4xidentical nema14, 8x m3-30mm, 2x20t 5mm id pulleys and one of each printed part to replace the front idlers, front panel mounting and a custom split front door (cad model included).
You will also need an mcu that can support at least 6 stepper drivers or dual mcu's. If adding a second mcu, make sure to put all 4 xy steppers on the same mcu.
Print with standard voron settings or increase perimeters. See image for print orientation of all parts.
https://github.com/VoronDesign/Voron-0
Don't worry about funny guy
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
