Tools & Spare Parts STL Download - Vacuum hook collectionby SigmaDesigners

Commercial license: You can print and sell these models.Video Link: https://www.youtube.com/shorts/nLhQa2pUIHI?t=5&feature=shareAvailable models:1. Plane round model,2. Plane star fish,3. Star fish.Concept:The flat surface of these models with water as medium creates a strong vacuum grip when pressed against a non-porous smooth surface. Theoretically these model can hold up to 11kgs and practically tested up to 1kg which is more than 300times there weight.Benefits: Safe and secure, Using fluorescent (Glow in the dark) material for hook will give an advantage of finding keys in the dark, No need to drill hole / use adhesive.Note: The print must be on smooth surface using glass bed is preferred but not compulsory, use high bed temperature to avoid glue stick/adhesive. Make sure that there are no air bubbles after pressing against wall.Materials:Holder: Any flexible resin/Filament – TPU, Nylon, E.T.CHook: strong resin / Filament - PLA, PETG, ABS, E.T.C,3D printing settings:Printer: FDM / RESIN,Retraction: 5mm speed 60,Nozzle Temp: minimum 190 to 210 C for PLA / minimum 200 to 230 C for TPUBed Temperature: 90 C (no glue stick/adhesive needed)Infill: Minimum 8%,Print in place,Print speed: 25Support: No supports needed, Layer height: 0.2, (use high diameter nozzle for fast printing)Build plate adhesion: brim at least 1mm,Print time:Plane models: 13minutesStar fish: around 30minutes,Hook: 2 minutes.The hook is a snap fit no adhesive required for assembling.Thank you,Have a wonderful day.Regards,Sigma Designers.