Thingiverse
Vacuum side brush final gear
by PaftDunk
2
Downloads
0
Likes
0
Makes
Tired of buying the whole motor when the brush pin broke I decided to measure the broken one and print a part that broke.
It has been printed with a Sovol SV06 ACE with a 0.4 nozzle and Orcaslicer with the 0.12mm profile and the following settings:
Quality > Line Width >
Default: 0.22
Outer Wall: 0.22
Inner Wall: 0.22
Sparse Infill: 0.22
Strength >
Wall loops: 4
Sparse infill density: 30%
Sparse infill pattern: Gyroid
Enable Support: Enable
OnShape cad drawing can be found here:
https://cad.onshape.com/documents/87e2aeffc83feebc6c1993f1/w/c0a2233f348b5f49b204a81e/e/1e850f88e7f22ead2976b77e?renderMode=0&uiState=6867979481717b6dac4769c8
Compatible with BL500 motors. Some vacuum cleaners that have these motors are: VCR16, Cecotec Conga (1290, 1390, 1490, 1590) Redmond R500.
It has been printed with a Sovol SV06 ACE with a 0.4 nozzle and Orcaslicer with the 0.12mm profile and the following settings:
Quality > Line Width >
Default: 0.22
Outer Wall: 0.22
Inner Wall: 0.22
Sparse Infill: 0.22
Strength >
Wall loops: 4
Sparse infill density: 30%
Sparse infill pattern: Gyroid
Enable Support: Enable
OnShape cad drawing can be found here:
https://cad.onshape.com/documents/87e2aeffc83feebc6c1993f1/w/c0a2233f348b5f49b204a81e/e/1e850f88e7f22ead2976b77e?renderMode=0&uiState=6867979481717b6dac4769c8
Compatible with BL500 motors. Some vacuum cleaners that have these motors are: VCR16, Cecotec Conga (1290, 1390, 1490, 1590) Redmond R500.
PaftDunk also publishes on
3 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
