Thingiverse
Vacuum Tube Sockets
von stinguc
17
Downloads
14
Likes
0
Makes
Few months ago i started to build the excellent vacuum tube tester [Sussex](https://vintage-radio.net/forum/showthread.php?t=48853) and i needed some common vacuum tube sockets. I found many of them online but they are pricey, so i decided to 3d print them.
For B7G, B8A, B9A & B9D pins i used 2mm diameter brass tubing sliced and cut to length, 11mm for B7G, B8A, B9A sockets and 13mm for B9D socket
Also on tubing i crimped & soldered copper wire, 0.8mm for B7G, B8A, B9A sockets and and 1mm for B9D socket.
For K8A i used 4mm diameter brass tubing cut at 15mm soldered on with a 1.5 mm copper wire.
Being used on a vacuum tube tester and on relatively short periods of time shouldn't pose any problem for ABS.
For B7G, B8A, B9A & B9D pins i used 2mm diameter brass tubing sliced and cut to length, 11mm for B7G, B8A, B9A sockets and 13mm for B9D socket
Also on tubing i crimped & soldered copper wire, 0.8mm for B7G, B8A, B9A sockets and and 1mm for B9D socket.
For K8A i used 4mm diameter brass tubing cut at 15mm soldered on with a 1.5 mm copper wire.
Being used on a vacuum tube tester and on relatively short periods of time shouldn't pose any problem for ABS.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!