MakerWorld
Hueforge & Lithophane
Vai al Modello
Valentine Flowerhead
0
Download
1
Likes
0
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 90x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Kingroon Red Transmission Distance: 4.1 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #15 (1.28mm) swap to Beige At layer #24 (2mm) swap to Jade White for the rest.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
