Thingiverse

Valkyrie187 V-Tail Mini-Quad

by Flip_N_Crash

75 Downloads

57 Likes

1 Makes

5" version of the Valkyrie. Top plate and camera mounts are the same as for the 137. I will be doing variations of the camera mounts for other camera sizes, and uploading them.

Make sure you place the arms flat on the bed before preparing to print. Also remove any auto-generated supports in the arm tubes. The antenna tubes are impossible to clean out, and the motor wire tubes are a pain. it prints those fine without supports.

Included is the .gcode for all components in PLA at 33% infill (17hr 45min print! Maybe better to print one at a time). Also ABS at 80% infill.

Will fit up to 23XX motor.

3D Frame diy drone fpv frame miniquad multicopter multirotor pmr Quadcopter v-tail Valkyrie Vtail

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, ABS

Est. print time

17 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Valkyrie187 V-Tail Mini-Quad need supports when printing?

No supports needed for Valkyrie187 V-Tail Mini-Quad — it's designed to print clean off the bed.

How long does it take to print Valkyrie187 V-Tail Mini-Quad?

According to the design notes, Valkyrie187 V-Tail Mini-Quad takes approximately 17 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Valkyrie187 V-Tail Mini-Quad available in?

Valkyrie187 V-Tail Mini-Quad is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Valkyrie187 V-Tail Mini-Quad free to download?

Yes, Valkyrie187 V-Tail Mini-Quad is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Valkyrie187 V-Tail Mini-Quad

Add to Collection