Thingiverse
Valorant Protocol 781-A Phantom
by 7Dimension
1k
Downloads
1.1k
Likes
3
Makes
Protocol 781-A Phantom
###Before Printing
- check if the part is on the right side
- check if you have enough infill/perimeter
- is your print bed big enough (20x20cm)? -> if not, rescale in your slicer
About The Project
This is my first really big 3D model. As a template I only had a 2D picture, because I wanted to get the model done before release (didn't work out). So don't see it as an exact replication, but as an adaptation to 3D printing. :)
...also the model became a little thicc
The new skin series of Valorant has fascinated me and so I decided to rebuild the Protocol 781-A Phantom skin in original size. The print time is expected to be in the neighborhood of 80 hours and will require at least about 700g of filament. The parts can be plugged together, but the model requires glue to hold everything together.
Important: The individual parts are designed for a print bed size of about 20 centimeters. I myself print at 90% size on my Prusa Mini+, so it should work
###Before Printing
- check if the part is on the right side
- check if you have enough infill/perimeter
- is your print bed big enough (20x20cm)? -> if not, rescale in your slicer
About The Project
This is my first really big 3D model. As a template I only had a 2D picture, because I wanted to get the model done before release (didn't work out). So don't see it as an exact replication, but as an adaptation to 3D printing. :)
...also the model became a little thicc
The new skin series of Valorant has fascinated me and so I decided to rebuild the Protocol 781-A Phantom skin in original size. The print time is expected to be in the neighborhood of 80 hours and will require at least about 700g of filament. The parts can be plugged together, but the model requires glue to hold everything together.
Important: The individual parts are designed for a print bed size of about 20 centimeters. I myself print at 90% size on my Prusa Mini+, so it should work
7Dimension also publishes on
2 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
