Valve handle

Handle for ball valve 5x8mm tap. There are two version (both quick to print) - the valve_handle_narrow.stl is for people with high precision printers (e.g. a Bambu Lab) - it will be a tight fit and might need some help. The valve_handle_wide.stl has a more relaxed cut-out for the 8x5mm mounting tab, but you still need a fairly precise printer. The screw from the original handle has been reused. Suggested slicer settings: 10 walls, 10 tops and 10 bottoms 50% infill Exclusive slicing (Cura, experimental) PLA (real PLA for hardness - not PLA+, ST-PLA, PLA-ST or any of these softer PLA's). Remember, not all filaments are the same! Some contract more, some less. You might need to play around with x-y scaling in your slicer to get a perfect fit over the valve tab - you want a tight fit with not play beween the tab and the handle, so make it as tight as possible and use some tool to get it onto the tab. Here printed on a Kingroon KLP1 in black CCTree PLA basic.