Vampire

Project: vampira.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Chrominal Deep Sea Blue Transmission Distance: 8 PLA+ IIID Max Violet Transmission Distance: 2.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Overture Matte Light Pink Transmission Distance: 2.2 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu Sky Blue Transmission Distance: 4 PLA PolyLite Temp Purple-Pink-Translucent (Med) Transmission Distance: 10 PLA Default White Transmission Distance: 5This print uses 9 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Deep Sea Blue At layer #15 (1.28mm) swap to Violet At layer #16 (1.36mm) swap to Blue Gray At layer #17 (1.44mm) swap to Light Pink At layer #18 (1.52mm) swap to Pure Yell