Thingiverse
Variables steckbares Wasserverteilersystem (Variable pluggable water distribution system)
door FreeBird11
0
Downloads
0
Likes
0
Makes
Variables steckbares Wasserverteilersystem
Für Schläuche mit einem Innendurchmesser von 7-8mm.
Sie benötigen O-Ringe 7-10x1,5mm und 9-12x1,5mm.
Der kleinere O-Ring muss in die 2mm Nut und dient nur der Einrastfunktion.
Der größere O-Ring muss in die 1,5mm Nut und dichtet zuverlässig ab.
Benutzen Sie Silikonfett für die O-Ringe.
Je nach Drucker müssen Sie eventuell andere O-Ringe verwenden.
(z.B. 7-10x1,5, 8-11x1,5, 9-12x,5, 10-13x1,5)
Variable pluggable water distribution system
For hoses with an inner diameter of 7-8mm.
You will need O-rings 7-10x1.5mm and 9-12x1.5mm.
The smaller O-ring has to be inserted into the 2mm groove and is only used for the snap-in function.
The larger O-ring has to be inserted into the 1.5mm groove and seals reliably.
Use silicone grease for the O-rings.
Depending on the printer, you may need to use different O-rings.
(e.g. 7-10x1.5, 8-11x1.5, 9-12x.5, 10-13x1.5)
Für Schläuche mit einem Innendurchmesser von 7-8mm.
Sie benötigen O-Ringe 7-10x1,5mm und 9-12x1,5mm.
Der kleinere O-Ring muss in die 2mm Nut und dient nur der Einrastfunktion.
Der größere O-Ring muss in die 1,5mm Nut und dichtet zuverlässig ab.
Benutzen Sie Silikonfett für die O-Ringe.
Je nach Drucker müssen Sie eventuell andere O-Ringe verwenden.
(z.B. 7-10x1,5, 8-11x1,5, 9-12x,5, 10-13x1,5)
Variable pluggable water distribution system
For hoses with an inner diameter of 7-8mm.
You will need O-rings 7-10x1.5mm and 9-12x1.5mm.
The smaller O-ring has to be inserted into the 2mm groove and is only used for the snap-in function.
The larger O-ring has to be inserted into the 1.5mm groove and seals reliably.
Use silicone grease for the O-rings.
Depending on the printer, you may need to use different O-rings.
(e.g. 7-10x1.5, 8-11x1.5, 9-12x.5, 10-13x1.5)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!