Thingiverse

Vase #654

by _Steve

89 Downloads

60 Likes

0 Makes

To print: use 0 top layers, 0% infill, wall width is .8, 3 or more bottom layers. Or print in vase mode (spiralize outer contour). Print time approx. 2 hours 20 minutes.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Vase #654?

Any FDM printer should handle Vase #654 just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Vase #654 need supports when printing?

No supports needed for Vase #654 — it's designed to print clean off the bed.

How long does it take to print Vase #654?

According to the design notes, Vase #654 takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Vase #654 available in?

Vase #654 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Vase #654 free to download?

Yes, Vase #654 is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Vase #654

Similar Models

Add to Collection