Other STL Download - VASE - POTby LeoMix3D

I wanted to experiment 3D printing with thick nozzles so I designed this container.It has multiple applications as a vase, flower pot, etc., for putting and storing things.It is very strong, thick walled and prints quite fast for a piece of this size.Approximately 130 x 130 x 160 mm.Four hours of printing using a 0.8 mm nozzle.Consumed 280 g of material.Final note: My laminator reduced the depth of the end grooves that are on the corners. This detail is not incorporated into the design, but I liked it and left it that way.It may not be achieved with other laminators so you will have to check with your own.3D PRINTING SETTINGSFDM Creality Sermoon D1 FDM PrinterMaterial: PLANozzle: 0.8 mmLayer thickness: 0,64 mmFiller: NOTop solid layers: 0Lower solid layer: 2Perimeters: 1Supports: NoRaft: NoENABLE VASE / PITCHER / PITCHER MODE etc. (whatever it is called in your laminator)Speed: 50 mm/sWhen using a thick nozzle it is convenient to increase the filament temperature. I used PLA printing the first layer at 240 degrees C and the remaining layers at 230 degrees C.