VaseMode MilkCrate

It is Stackable! There is also a non-stackable, flat-bottomed version. There are 2 versions of each. One says "milk crate" the other is plain. Put your own name on it. I used Techniqu font in Tinkercad.

The stackable crate (S) needs support for the bottom edges. I had to use a support blocker above 2.0mm, otherwise mine would print it in NON-VASE MODE even after passing 2.5mm layer height. The flat-bottomed crate (F) does not need support.

Inspired by "Milk Crate https://www.thingiverse.com/thing:3349271". It's not a remix. I rebuilt it from scratch to print in vasemode. I printed the original file (MILK_CRATE_13.stl) at 75mm square. I looked at it to build this one.

Vase Mode
.25mm layers .8mm wall thickness & linewidth (I use a .4mm nozzle)

Flat-Bottomed Crate (F) bottom thickness = 4 layers = 1.0mm. no support

Stackable crate (S) bottom thickness = 10 layers = 2.5mm. with support only for bottom 2.0mm and a support blocker above 2.0mm

the STACKABLE CRATE 3D object