Vectorial Dragon Bookmark

Fancy a different bookmark?Here comes the Vectorial Dragon! A dragon made of lines! The model comes with 4 holes in the corners and cord hole in the top part. Feel free to remove and or play with them as you see fit. Boost MeBoost me if you like fantasy!As usual you can scale on X&Y axis but do not scale on Z to not mess up layers and color changes.If you do resize please remember to uncheck uniform scale in the interface to avoid problems. Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 40.08x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA JAYO Gray Transmission Distance: 5.6 PLA JAYO White Transmission Distance: 7.2This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #14 (1.