Vegeta HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3.3mm and the Actual Depth is 3.4mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA Prusament Lipstick Red Transmission Distance: 3.3PLA Prusament Royal Blue Transmission Distance: 0.8PLA BambuLab Matte Lilac Purple Transmission Distance: 2PLA Prusament Ms. Pink Transmission Distance: 4.1PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Lipstick RedAt layer #10 (0.88mm) swap to Royal BlueAt layer #12 (1.04mm) swap to Lilac PurpleAt layer #19 (1.6mm) swap to Ms. PinkAt layer #25 (2.08mm) swap to BeigeAt layer #35 (2.88mm) swap to Jade White for the rest.