Vegeta

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 140x242.52mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 4 PLA+ Sunlu Yellow Transmission Distance: 6 PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu White Transmission Distance: 5 PLA+ Sunlu Blue Transmission Distance: 0.5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #16 (1.36mm) swap to Black At layer #17 (1.44mm) swap to White At layer #22 (1.84mm) swap to Blue for the rest.