MakerWorld
Engineering
Voir le modèle
Vekoma Corkscrew roller coaster model
146
Téléchargements
77
Likes
49
Makes
A realistic model of a roller coaster corkscrew designed by Vekoma. It's inspired by Formula at Energylandia. I recommend printing it with basic PLA, but you can try other filaments at your own risk. The model is 2 plates and takes about 22 hours (or 17 if you print it from Bambu studio) to print it in full color. To remove the supports for the track I recommend using small pliers and removing at the thick part of the supports and they should come off easily. I recommend using superglue and building from bottom to top and the chart I made labels where all of the pieces should go. Enjoy! (and let me know if there's anything wrong with the print) Building Difficulty: 4/10Dimensions: (Length - 8.7 inches) x (Width - 12.5 inches) x (Height - 8.1 inches)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !