Velcro Organizer - Parametric

Velcro Organizer - Parametric My second take on a organizer model utilizing velcro-straps. This was made specifically for the online parametric editor here on MakerWorld. The model is made in Fusion and every iteration is verified both digitally and with physical print to make sure there are no errors making the model un usable. I though I should provide a quick and crude demo of the process of the modelling so here is a short video of the steps (not the parametric setup and formulas in use) CUSTOMIZATION: Width: The width of the model (mm) (There is a minimum of 10mm width. With 3 mm hooks on both sides of the model for the velcro strap to go through that leaves 4mm for what ever you want to secure using these. The maximum size is only limited by your maximum print size) Strap Width: The width of the velcro strap (mm) (There is a lower limit at 5mm for the strap width. No upper limit) Strap Thickness: The thickness of your velcro strap (+0.2mm for clearance) (mm) (This setting adjust