Slicer Discord
Velcro Strap Cable Organizer – 3D-Druckmodell von Thingiverse Thingiverse

Velcro Strap Cable Organizer

von C-Through
26 Downloads
90 Likes
0 Makes
Zum Modell
### Usage
This mount helps manage and organize large amounts of cables for your battle station or entertainment area using **20mm** Velcro ties.

### Configurations
The mount can be configured in several different ways using 1-3 ties for ease of access or long-term organization.

![Configuration Example](https://cdn.thingiverse.com/assets/b0/84/5a/18/c7/large_display_CableConfigurations.png)

### Feeding Ties
It's easiest to feed the ties from the back before mounting. However, ties can also be fed while mounted. To do this, feed the tie into the wider slot going towards the screw hole. I've found that having the rough part of the Velcro facing towards made it easier for wrapping and rolling cables.

![Feed Example](https://cdn.thingiverse.com/assets/2a/4a/60/f0/8f/large_display_CableFrontFeed.png)

### Wrapping Ties
When wrapping, join the rough part of the Velcro as close as possible to the cables. Unless you're wrapping quite a few cables, there's going to be plenty of excess whi
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

3 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen