Veml 7700 outdoor case

Veml 7700 outdoor caseCover for veml7700 by adafruit, for outdoor weather station.The box is divided into two parts. The upper part is made of transparent PET-G filament with 100% filling. The hexagon on top should help guide the light to one point, the sensor.The lower part is printed from white PET-G, with 100% filling. On the bottom side there is a hole for a 19mm diameter cable gland. There is a 1.6 mm groove on the top for sealing. I made the seal by inserting 1.75mm TPE 32 filament into the groove. This should ensure IP44, which is sufficient for outdoor use (I do not guarantee). I only tried it in the sink and running water. Screws The model contains 7x M3 threaded inserts, which must be pressed in with a soldering iron.All screws are M3 with a length of 10 mm, with an Allen cylindrical head.- 4x for attaching the top part- 3x for attachment to the holder About printingThe model is printed from PET-G for better thermal stability and UV resistance. The hexagon top cover is printe