Venice hueforge

Venice hueforged   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm The Model is 130x130mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm   Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #10 (0.88mm) swap to Beige At layer #15 (1.28mm) swap to Orange At layer #16 (1.36mm) swap to Yellow At layer #18 (1.44mm) swap to Jade White for the rest.