MakerWorld
Hueforge & Lithophane
Ver Modelo
Venice hueforge
10
Descargas
5
Likes
2
Makes
Window to Venice hueforged Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmThe Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to BlueAt layer #10 (0.88mm) swap to BeigeAt layer #15 (1.28mm) swap to OrangeAt layer #16 (1.36mm) swap to YellowAt layer #18 (1.44mm) swap to Jade White for the rest.
Michele MM3D también publica en
423 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
