VENOM hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm The Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used:PLA+ ESUN Black Transmission Distance: 0.3PLA+ Sunlu GREY Transmission Distance: 1.2PLA+ ESUN SILVER Transmission Distance: 3.6PLA+ ESUNBasic White Transmission Distance: 5This print uses 4 unique filaments !!!! It appears you have mixed filament types.