Venom Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mm Filaments Used: PLA PolyLite Pro Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA PolyLite Pro White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #26 (1.16mm) swap to Blue Gray At layer #39 (1.68mm) swap to Beige At layer #46 (1.96mm) swap to White for the rest.