Vent curtain blocker

This is to hold back the curtains from the vents. Vents are usually designed under windows. New trend of curtains are usually long. So this will hold the curtains back onto the wall. I designed it to fit a magnet that is 60x10x5. This size is very strong. You can get this from Amazon. Maker's supply only have a 30x10x3. You would need two of these, but you'll have to use a 2mm spacer behind the magnet. It is designed to hold two magnets, but only one is needed. The bottom one will stick to the vent itself. It has a groove with screw holes so you can screw a strip of painted wood or material cut to length, so you can attach to or more together. Or use them as they are. The design will force itself to lean towards the wall. Once printed. Insert/slide magnet into the grooves. Use the little plug to seal it by using superglue. Plug the other one also, even if you are not using a second magnet. The top magnet is optional.