MakerWorld
Electronics
Go to Model
Ventilated Trigkey G4 Case
16
Downloads
5
Likes
3
Makes
Ventilated Trigkey G4 Server Case (with 92mm Fan Support)I use my Trigkey G4 as a small home server — it’s an amazing little beast, but the stock case tends to trap heat and collect dust over time.So I designed this fully-ventilated enclosure to keep everything running cool and clean.With the 92mm USB fan installed, my temperatures now rarely go above 35°C, even under load.FeaturesDesigned specifically for the Trigkey G4Large 92×92×25mm USB fan mount on the bottom (intake)Vertical airflow: bottom intake → top/side exhaustSupports the original SATA expansion adapter for an additional SSDDust-resistant vent layoutEasy assemblyFits on a 230mm print bedAssembly NotesYou’ll need 4× M4×50mm screws for the top cover.I glued the mid section to the bottom to simplify assembly, but you can bolt it if you prefer.The USB fan can be powered from:an existing USB port, orsoldered directly to the motherboard padsIf you use the SATA adapter, I recommend attaching it with double-sided tape to the inside
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!