Versacopter Skirts MAX Version 2

The original idea with these skirts was to create a design for an AP setup on the Versacopter that would allow longer booms for bigger motors and props to lift a gimbal.

With version 2 of these skirts I wanted to maximize internal space. In an effort to make as much room as possible inside the Versacopter, I took my original Versacopter MAX skirts which are 28mm tall and made them 43mm tall. I have also squared off the arm clamps which add 17mm in internal length. I didn't want to do much with the sides but when dealing with a small space every millimeter counts so I reduce them from 5mm wide down to 4mm wide which gives an extra 2mm of width.

With this setup it is possible to install a Vector flight controller inside the Versacopter with room to spare.

Due to how tall these skirts are you will need 50mm M3 screws for assembly.

Please visit http://RcPartsHangar.com where I offer most of my designs for purchase.