Slicer Discord
Vertical Brush Stand – 3D printable model from MakerWorld MakerWorld
Organizers

Vertical Brush Stand

2.4k Downloads
1.2k Likes
1.2k Makes
Go to Model
Only had a small place left in craft space and needed storage for more brushes . Do to height limitations I need something that pulled out the front so it could be placed beneath my monitor. not seeing any thing like what I needed I decided to make the perfect one for my self. with a small 3.5" x 3.5" footprint it can be tucked away. While still allowing easy access to all storage with the forward facing shelves at a steep enough angle to make sure nothing comes tipping out. Shelves are small to large from top to bottom with the top perfect for those fine detail brushes, and the bottom big enough to hold multiple pens. Included additional slim vertical storage on each side for those spindly tools and a cavity near the base for extra bits and bobs. Boost MeIf you like the model, consider a Boost! single piece no supportsvertical paint brush stand with lots of storage4, 7.5MM slots3, 10MM slots2, 13MM slotsat 110MM deep 59MM wide2, 6MM vertical slotsat 73MM deep 57MM wide 89x89mm
Category
Organizers
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Why?
print-in-place design
Print-in-place
Supports 1/3
Assembly 0/3
Settings 2/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
89 mm (Medium)
Post-processing
Painting
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Vertical Brush Stand?
Any FDM printer should handle Vertical Brush Stand just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 89 mm is recommended.
Does Vertical Brush Stand need supports when printing?
Nope — Vertical Brush Stand is print-in-place, so it comes off the bed ready to use. No supports, no assembly.
What file format is Vertical Brush Stand available in?
Vertical Brush Stand is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Vertical Brush Stand free to download?
Yes, Vertical Brush Stand is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection